See Your Product Here
To get your product in Turbo magazine's New Product Section send a 50- to 100-word press release describing the product and a photo (color slide preferred) to:New Products Editor, Turbo Magazine 774 S. Placentia Ave. Placentia, CA 0870.
Holley
Holley Performance Products is now offering high-flow, two-piece, black anodized billet aluminum Volumax filters for fuel, engine oil and transmission and differential fluids. These filters use washable stainless-steel filter screens that provide continuous unrestricted filtration with no bypass. They are CNC machined and to simplify installation, each filter case half can be rotated 360 degrees to accommodate any required port alignment.
The Volumax filters are available in four diameters (4, 6, 9 and 12 inches) and three filter screens (28, 60 and 115 microns), in single- or dual-port design. Dual-stage filtration is available for the 6-inch diameter Volumax filter by installing a spacer plate and a second screen. Aside from precise filtration, one of the main advantages of the Holley Volumax billet filters is its serviceability. Remove the through-bolt, remove the screen, wash and replace. The two filter halves are sealed by the O-ring on the edge of the filter screen. Debris removed from the liquid is easily seen on the filter screen; you can tell from the residue if a component is about to fail.
For more information contact: Holley Tech Service, Dept. THP, P.O. Box 10360, Bowling Green, KY 42102-7360, (270) 781-9741 or on the web at www.holley.com
Hahn Actuator Upgrade
Hahn Racecraft has developed a wastegate actuator upgrade for the T-25 turbo to relieve the problem of the turbo "running out of steam" at upper rpm.
Due to a weak actuator spring the stock T-25 turbo wastegate will open and release boost even with the pressure signal removed. Easy to install, this upgrade gives the '95-'99 Talon Eclipse owners the upper rpm power they expect
For more information contact: Hahn Racecraft, 1981 D Wiesbrrok Dr., Dept. THP, Oswego, IL 60543, (630) 801-1417 or www.hrchahnracecraft.com.
E-TKT
You'll get the ride of your life with the E-TKT. This two-piece silver painted and clear-coated center with polished spun rim is here from 562 The Wheel. Available in sizes 16x7-, 17x7-, 17x8-, 18x7- and 18x8-inch.
For more information contact 562 at (800) 816-4562.
Heavy-duty Strut Tower Bar
Kenny Brown has just developed a new heavy-duty Strut Tower Brace, designed to fit 1999 Ford Mustangs. The Strut Tower Brace is engineered to strengthen the engine bay and front suspension by triangulating the strut tower with the cowl to improve rigidity, and manage chassis loads from engine torque and hard cornering.
For more information contact: Kenny Brown Performance, 57 D Gasoline Alley, Dept. THP, Indianapolis, IN 46222, (317) 247-5320, www.kennybrown.com.
XT2 Competition Muffler
Functionally designed for road, show and race use, the XT2 Pro Drag Muffler is currently available exclusively through SPW. This unique muffler features polish stainless steel throughout, precision seamless welds, competition flare tip and quality sound resonating materials. The barrel-through design allows for the low-back pressure needs of modified import vehicles that are either normally aspirated or turboharged. It is 5.34 inches in diameter, approximately 21 inches long with 2.25-inch inlet and a 4-inch outside tip diameter. The design of the Pro Drag amkes it easy to configure for use on numerous vehicles with and without additional body work.
For further information contact: SPW, Dept. THP, 3434 S. Saviers Rd., Oxnard, CA 93033, (805) 385-3676.
Mechanix Wear
Mechanix's Traction Control Shoe is perfect for crew members, staff and mechanics that require performance, comfort and style at the office, in the shop and on the track. These shoes incorporate quality, heavy-duty construction including a nylon mesh/leather upper, reinforced rubber heal and toe, and a molded anti-skid rubber sole for comfort and traction. The three-quarter design provides both support and protection.
For further information contact: Mechanix, Dept. THP, 24950 Anza DR., Valencia, CA 91355, (800) 222-4296. www.mechanix.com.
Moroso
Moroso's new quick release steering wheel hub and adapter (No. 80160) is approved by SFI for the use in NHRA, IHRA and other racing organizations. The lightweight billet aluminum hub features a quick-release pin that's easy to use with a three-hole, 1.75-inch diameter bolt pattern. The steering shaft adapter is manufactured from 1018 steel for extra strength and ease of welding.
For further information contact: Moroso Performance Products, Dept. THP, 80 Carter Drive, P.O. Box 1470, Guilford, CT 06437-0570, (203) 453-6571, www.moroso.com.
ZEX
Zex's distinctively purple Nitrous Kit is designed to deliver the performance demanded by enthusiasts and do it with style. Superior aircraft quality construction and high-tech electronics make this system appealing from a performance and reliability standpoint. Features include chromed valve, electronic throttle switch, high flow nozzle and plumbing and Nitrous Management unit to provide unmatched performance.
For information contact: ZEX, Dept. THP, 3418 Democrat Rd., Memphis, TN 38118, (800) 817-1008, www.zex.com.
SI Industries
Si Valve's new Claimer series valves are ideal for use in Claimer race classes where both durability and economy are vital. These stainless steel valves feature one-piece construction and hardened tips. And they're fully swirl polished and undercut for better flow. These valves are manufactured in the U.S. from high- quality stainless steel. Intake valves are offered in both 21-2N (better) and 21-4N (best) stainless, while the exhaust valves are all made from 21-4N. SI offers Claimer series valves in most popular sizes for small block Chevys, big block Chevys and small block Fords. SI offers a full line of valves for street racing application, including a new Limited Class series or valves for race classes that have limits on the undercut stems.
For further information contact: SI Industries, Dept THP, 2175 A- Agate CT., Simi Valley, CA 93605, (800) 343-4287.
RK Sport
RK Sport now offers a Ceramic Coated Header for all 1995 Cavaliers and Sunfires.The RK Sport unit is manufactured from the highest quality 1.5-inch tubular 14-gauge steel. Each tube is CNC mandrel bent for precise fit with a four-coat ceramic finish on the outside and one-coat on the inside for maximum heat dissipation and airflow efficiency. Features include flat-ground 3/8-inch CNC-manchined flanges, consistent collector transitions and splatter-free welds. Both 2.4- and 2.2- liter applications are 4-into-1 pure race design.
For more information contact: RK Sport, Dept. THP, 214 Via El Centro, Oceanside, CA 92054: Phone: (760) 433-1663, www.rksport.com.
Eagle One Wet Polish and Wax
Eagle One Wet Polish and Wax combines three steps into one; it cleans, glazes and waxes. It also fills and removes unsightly hairline scratches with incredible ease. It is formulated for use on all painted surfaces, including clear coats.
Packages of Wet polish and Wax will include a free limited edition replica of Mark Martin's 2000 NASCAR Winston Cup Eagle One/Roush Racing Ford Taurus. A die-cast body and chassis, opening hood detailed engine and real rubber tires are many of the unique features. Also included is a Mark Martin collector card. Available at leading auto supply and discounts chains.
For more information contact: Eagle One, Dept. THP, 5927 Landau CT., , Carlsbad, CA 92008: Phone: (800) 432-4531, www.eagleone.com.
Hiper Damper
Need to get a handle on your performance vehicle? Handle it with the HKS Hiper Damper System. The Hiper Damper Suspension System enables the suspension to be custom tailored to each driver's preference with 10-way adjustable shock dampening. The "get the power to the pavement" system also comes with adjustable spring dampening, height and shock dampening adjustments, and features shock valving that is adjustable externally. The revolutionary HKS Pillow Ball Mounts also come standard on all Hiper Damper Suspension Systems, ensuring that all those "ponies" make it to the ground. All HKS suspension components are constructed from the highest quality steel and aluminum and are designed to stand up to even the most severe road and/or track conditions. Current applications include the '93-plus RX-7, '93-plus Supra, '94-'97 Accord, '90-plus Miata and the Acura NSX.
For more information contact: HKS USA Inc., Dept. THP, 2801 E. 128th St., Carson, CA 90810, (310) 763-9600. www.hksusa.com.