868 LB-FT Of Torque
Tommy Banh has a need for speed unmatched by anyone-Maverick included. Tommy isn'tan F-16 jock. He's the king of the standing mile and he flies a Supra. His previous car, a six-speed '95 Anthracite, which appeared in Turbo, topped out at 201 mph at the famed Texas Mile in 2006. Tommy was up to his old tricks and up to stratospheric speeds in 2007 with an all-new dance partner.
"After I sold my record-breaking 201mph car in June 2006, I bought a very rare low-mileage '98 Quicksilver Supra turbo from a personal friend of mine, Peter Blach," Tommy says. Since Toyota only made 24 six-speed Quicksilvers in 1998, the Supra was a real find. Factor in that the car had a scant 11,000 miles on the odometer and it was a truly a rare gem. Some people, including us, wonder why such a pristine example was turned into a speed demon instead of a tired mule that would embrace a 10-point rollcage and 220-plus mph top speeds. But Tommy had a plan. "There were two goals for this car that I wanted to accomplish, 220-plus mph in a standing mile and 8s in the quarter-mile," he says.
A Garrett GT4718R turbo mated...
A Garrett GT4718R turbo mated to a Full-Race T6 Pro Street exhaust manifold.
The build began in October 2006, Tommy says when he pulled the stock motor and everything else out of the engine bay. He sent the carcass to Modena Autowerks in Houston for paint in the engine bay and a fresh clearcoat. The only additions were the RMM carbon-fiber wing and the Paisley lip spoiler. From the booth, the car was then sent to the chassis shop for a 10-point cage and removable parachute assembly to make it legal for NHRA (8.5 seconds). "I plan to keep this car as a street car so we installed swing outs as part of the cage on both sides for convenience," he says.
While the chassis was in Houston, Tommy hit full boost on the engine-building portion of the project. "The motor build started with a brand-new core from Toyota, and then I went with the trusted Titan Motorsports 3.4L stroker kit that consists of a 94mm stroke billet crankshaft, CP pistons, and Carrillo H-beam rods," he says. The centerpiece of the Titan kit is the full billet crank that ups the stroke from 86mm to 94mm.
"Everything around the turbo...
"Everything around the turbo had to be custom-the upper and lower water neck, the down pipe, and the exhaust system," Tommy says.
Tommy enlisted G&G Performance for the critical machining of the block in preparation for big boost and 220-plus mph. G&G also performed its magic on the cylinder head. Tommy used Ferrea 2mm oversized valves, double valvesprings, and retainers. Sound Performance custom Crane camshafts with big lift and duration orchestrate valvetrain events.
The pressure player is a Garrett GT4718R turbo. A pristine Full-Race T6 Pro Street exhaust manifold secures the large-frame turbo. The turbo system is setup to move a large volume of air for long periods of time. Twin TiAL Sport 44mm wastegates direct flow to a mammoth 5-inch AutoBanh Motorsports (ABM) down pipe and a corresponding 5-inch exhaust.
A custom ABM fuel system,...
A custom ABM fuel system, a six-pack of 165lph injectors, an ABM .10 AN fuel rail, and a Weldon fuel pressure regulator.
"For the intake side I like the Virtual Works intake manifold," Tommy says. They put together a custom ABM fuel system with a Weldon 2345 external pump, a Weldon Dial-A-Flow, a six-pack of 165lph injectors, an ABM -10 AN fuel rail, and a Weldon fuel pressure regulator. "As for the drivetrain, we used the best of the best, a Tilton quad-disc clutch with TRD LSD for the rear end," he says. "As a Supra owner for about 10 years now, I went through so many clutches, and this clutch is the best. It can take so much power and torque. The engagement is very smooth and very streetable."
Tommy says the hardest part of this build was the fabrication and custom parts that had to be fabricated to get everything to fit around this substantially big turbo. "Everything around the turbo had to be custom-the upper and lower water neck, the downpipe, and the exhaust system," he says. "The intercooler was tricky as we fabricated end tanks on the biggest Garrett air-to-air intercooler that can fit and make it work with the GT47."
Titan Motorsports 3.4L stroker...
Titan Motorsports 3.4L stroker kit that consists of a 94mm stroke billet crankshaft, CP pistons, and Carrillo H-beam rods.
Twin TiAL Sport 44mm wastegates...
Twin TiAL Sport 44mm wastegates direct flow to a mammoth 5-inch AutoBanh Motorsports (ABM) down pipe and a corresponding 5-inch exhaust.
As with the previous car, an AEM engine management system tuned by Tuning Concepts Justin Nenni runs the show. "Going from stock displacement to a 3.4L stroker made a big difference in spooling the big turbo," Tommy says. "There is only so much you can do to the 3.0 liter. The 3.4 liter makes a much better powerband because it is able to move more air."
The ABM Supra shocked the world at the '07 Texas Mile. Built to Unlimited Street class specs the Quicksilver Supra lived up to its color, beating all comers, even cars in the Unlimited Race class. Tommy's main competition was a twin-turbo land speed Viper and a twin-turbo Ford GT.
"I made four passes on the first day and put up 222.37 mph and was barely ahead (by 0.13 mph) of the twin-turbo Ford GT that was in my class, Unlimited Street," Tommy says. "I was going to leave after a hectic day in the heat of battle, but the GT was going to take another crack at me ... plus I wanted to run 230. So early Sunday morning I decided to go back. I was running on 19-inch wheels and tires, and they were spinning burnout style well into Fourth gear. A good friend came through with a set of 18-inch wheels with some sticky Toyo RA1 tires. These did better and got me hooked up earlier, right after shifting into Fourth gear rather than in the middle of Fourth gear, which gave me more of the mile to generate speed. I was at full traction by the half-mile and running way better than the day before. I went through the traps at 228.7 and was turning around 9,300 rpm. The 222mph run was at 30 psi, but with the better tires I bumped it up to 32 psi. The scary thing is that there's 250 hp still on tap."
The story isn't over yet. "I still have to go for my other goal-8s in a quarter-mile," Tommy says. We wouldn't be surprised to see the ABM Supra back at Texas Mile to defend its title. "Yeah, 228 is good but my new goal is 240 mph," he says. Yep, they live big in Texas.
Titan Motorsports stroker kit
SP custom crane camshafts
Ferrea 2mm oversized valves
Ferrea double valvesprings
Unorthodox cam gears
Garrett GT4718 turbo
ABM down pipe
ABM exhaust system
TiAL Sport wastegate
TiAL Sport blow-off valve
HKS DLI ignition amp
Weldon fuel pump
ABM fuel rail
Precision 165lph injectors
AEM engine management system
HKS drag coilovers
Tilton quad-disc clutch
C's short shifter
Drive Shaft Shop driveshaft
TRD limited-slip differential
Paisley lip spoiler
Wheels & Tires
Fikse FM5 Profile 19x9.5, 19x11
Yokohama Advan Sport
868 LB-FT Of Torque