Detailing 101 - 2003 Suzuki Aerio

How to use a clay bar
Performing a basic car wash can guarantee you'll be removing the dirt and grime off your car but at times this process alone is not 100 percent effective. Harsh environmental and road conditions cake on a layer of foreign materials that accumulates over time. Simple waxing is ineffective to removing these contaminants embedded into the paint surface. The only alternative is a "silly putty"-like substance called a clay bar, which can effectively address the problem. The clay bar is a simple yet effective tool that pulls contaminants from the paint surface while performing a sheering process, removing remnants that are harmful to the paint such as ferrous metal contaminants, paint overspray, and simple oxidation. Note that the clay bar will not remove acid rain damage or other surface imperfections-something you'll still need a polish to do.

Remove the clay from the wrapper and knead the putty into a flat surface. Before you begin the claying process slide your fingertips across a section of your paint. If you hear or feel bumps or rough spots it's a good indication that there are contaminants on the surface of your paint. Lightly run the clay across a section that has been lubricated using a spray lubricant such as Mothers' Showtime Instant Detailer. It is important that you use the proper lubricant. Water alone isn't considered slippery enough, causing the clay to leave streak marks on the paint. The initial rough sounds you encounter should gradually disappear as the clay is working its magic by removing any and all contaminants. Recheck the area you just clayed with your fingertips once again. Once the area is smooth, move on to the next area; if you still feel bumps repeat the process. Knead the clay on a regular basis or when the area used on the clay bar turns a brownish color. Because claying removes any impurities, including wax protection, the clay bar process should be followed up by a good wax job. [Ed. note: I swear by the claying process. It makes an old car's paint look new again. Do try it if you haven't already.]

FX Wheel Cleaner and Tire Shine
Your local $5.99 Tuesday special car wash doesn't have the time to cater to every specific type of rim they wash. Their main purpose is to get your car washed and dried in record time in order to service the next customer. The "one kill cures all" approach is often used by your local car wash center as they use industrial-strength chemicals that burn the clearcoat or etch stains on those custom aluminum rims you worked so hard to obtain.

Mothers knows too well the importance of proper wheel care and has recently released a third generation of wheel cleaners for the Mothers lineup called the FX Wheel Cleaner. The FX cleaner is a chemically safe spray-on system for all types of wheels, including clearcoated, painted, polished, and chromed. FX Wheel Cleaner is a powerful, fast acting wheel cleaner that took to our trouble spots on the rims, such as road tar and axle grease, which were easily removed when combining the spray and Mothers agitating brush.

Following the removal of brake dust and road soot, we gave our lovely brown tires a makeover with FX Tire Shine. A unique blend of polymers and advanced coating agents bind with the tire's surface, shielding it from UV oxidation, brake dust, and road grime, giving it a slick, shiny appearance that's sure to complement any custom wheel.

How long before my next wax job?
That's the million-dollar question. "How often should I polish or wax my vehicle?" It's not a question of frequency but a question of need. Mothers recommends pre-waxing your vehicle with their cleaner bi-monthly and waxing every 8 to 10 weeks depending on weather conditions and area you most frequently drive through. A darker colored car requires more frequent polishing to keep it looking good. Darker colored cars, which tend to reflect more light than lighter colored cars, require more maintenance. On the flipside, owning a lighter colored car, such as white, does have its set of drawbacks. Light cars show less dirt, leaving owners with a tendency to often neglect polishing because the defects aren't as prevalent to the naked eye. Often, the owner's neglect can lead to a dirty, dull-looking car. In either case, polishing is an important aspect of the waxing and polishing process.

What type of wax is best suited for my vehicle?
"It's not a question of advantage of using one type of wax over another but it basically comes down to personal preference." says Holland. Some people believe that using a carnauba wax leaves a nice velvety smooth look to it, a shiny yet classy look; whereas new synthetic waxes, such as the FX lineup, appears to have a lot more "bling," which can give an owner an option in aesthetic differences-not a case of one better than the other. "We developed the FX lineup with our import market ... in mind," states Burnett.

FX SynWax was developed as a synthetic polymer blend. Unlike a natural carnauba wax, SynWax can be applied and left on for hours at a time, yet still be removed easily and cleanly. Developed as a standalone product, SynWax combines polishing and waxing into one step. This product not only saves precious time but also becomes an added bonus for those who dread the hours spent on waxing in multiple stages.

Periodic paint care can be accomplished by simply using the FX Spray Wax as a wax booster on high-traffic areas such as the front bumper or hood. A quick spray and wipe is all you need to provide added protection until your next detailing date. Depending on your vehicle's paint condition and how anal retentive you are towards your detailing process, a sealer wax can be used as the final stage for your vehicle. There's no such thing as a wrong way to detail your vehicle as long as you follow the basic procedures of a good wash, clay if necessary, and proper waxing using an all-in-one solution such as the SynWax.

Yearning for more tips on how to maintain your paint? Check out www.mothers.com for more detail on everything from scratch removal to interior care.