 Position the skid plate used...  Position the skid plate used to protect your fuel system to drill holes into your trunk area. |  The AMS surge tank makes installation...  The AMS surge tank makes installation a simple one-two process thanks to the quick connect hose ends that easily mate up with factory fittings. |  Mark the positions and drill...  Mark the positions and drill into the tire well. |
 Tie up any loose ends using...  Tie up any loose ends using zip ties. A provided clamp secures the lines onto the fuel tank shield, which needs to be carefully drilled and secured using bolts. |  Drill the provisionary holes...  Drill the provisionary holes into the spare tire well to secure the brackets holding the surge tank. |  Position the skid plate used...  Position the skid plate used to protect your fuel system to drill holes into your trunk area. |
 Mark the positions and drill...  Mark the positions and drill into the tire well. |  Install the two 8mm bolts...  Install the two 8mm bolts and secure the two nuts and bolts into the tire well you previously drilled. |  We found that using 5 to 6mm...  We found that using 5 to 6mm spacers on all four corners seems to work well in spacing the skid plate due to some clearance problems we experienced when mounting the unit. Be sure to purge the system before firing up. Check for any leaks before going on your testdrive. |